My foam looks thin. How do I fix it?

Try this quick checklist: Soap & mix: Use a high-foaming car shampoo; start around 1–2 oz per 16 oz bottle (adjust to taste). Fill with warm water to help it blend. Water distribution dial: Close the water mix knob a bit. Turn clockwise for more foam. Generally keep this fully turned clockwise. Nozzle pattern: Use a wider fan, keep the cannon vertical, and hold the tip 24" from the panel. Water & hardware: Hard water reduces foam— flush and descale the cannon periodically (white vinegar works). Make sure your pressure washer meets the User Guide specs and that all O-rings/quick-connects seal properly. Filter maintenance: If output fades, remove the foam filter/mesh, rinse, and soak to clear soap residue or scale; replace with provided extra filter if needed. Always flush clean water through the cannon for 15–30 seconds after use.

How do I maintain and store DRFT so it keeps performing?

After every wash: Run clean water through the cannon for 15–30 seconds , then empty the bottle and let it air-dry. Don’t store with soap inside. Monthly (or every ~10 uses): Remove the pickup tube and foam filter/mesh , soak parts in warm water or a mild vinegar solution to dissolve soap residue and scale, rinse, and reassemble. O-rings & seals: Inspect periodically; replace if flattened or cracked. A light silicone grease on O-rings helps sealing and longevity. Connections: Keep the 1/4" quick-connect clean; make sure fittings seat fully before use. Storage: Keep upright , out of heat/freezing temps, and depressurized . Hand-tighten the bottle—no tools—to avoid cross-threading.

Armour DRFT Foam Cannon

Name: Armour DRFT Foam Cannon
Brand: Armour Detail Supply
SKU: ADSDRFTFOAM
Price: 44.99 USD
Availability: InStock

Armour DRFT Foam Cannon — close-up product detail

Armour DRFT Foam Cannon — alternate product angle

Armour DRFT Foam Cannon — studio detail shot

Armour DRFT Foam Cannon — product close-up

Armour DRFT Foam Cannon — secondary studio angle

Armour DRFT Foam Cannon — detail of the product

Armour DRFT Foam Cannon — product shown from another angle

Armour DRFT Foam Cannon — additional studio shot

Armour DRFT Foam Cannon — close-up product detail (view 2)

Armour DRFT Foam Cannon — shown in use during a vehicle detail

Armour DRFT Foam Cannon — being applied during a professional detail

Built to work. Priced to win.

$44.99

Shipping calculated at checkout.

Quantity

Dirt Release Foam Technology

The DRFT Foam Cannon is built for enthusiasts who demand high performance, reliable build quality, and consistent results wash after wash. Powered by our Dirt Release Foam Technology, DRFT transforms your favorite car shampoo into a thick, clinging foam that helps break down grit and grime before you ever touch your paint, reducing the risk of swirls and scratches.

At its core, DRFT features a nickel-plated brass body and internals, offering near-stainless durability with better value. The 1L wide-mouth bottle is easy to fill, stays upright, and includes molded volume markings for accurate dilution. Fine-tune your foam output with the oversized metering knob, then switch from vertical to horizontal spray in seconds with the adjustable fan nozzle.

Whether you're using an entry-level electric washer or a high-flow setup, DRFT includes everything you need to dial in pro-level foam plus the durability to last season after season.

Performance & Build Highlights:

Operating range: 800 – 3,000 PSI and 1.4 – 5.0 GPM (Max 140°F / 60°C)
Nickel-plated brass core with stainless fitting for corrosion resistance
1L wide-mouth bottle with molded volume markers, stable, grippy, and easy to fill
Oversized metering knob with distinct click-stops for precise and repeatable foam output adjustment
Adjustable fan nozzle for quick vertical/horizontal switching
Flexible silicone dip tube with weighted ball and integrated filter for consistent product pickup, even when tilted or running low
EPDM seals and stainless mesh inlet filter resist harsh chemicals and clogging
Head features integrated breather holes to prevent pressure buildup and leaking once the bottle is secured

What’s in the Box:

(1) DRFT Foam Cannon with 1L Wide-Mouth PET Smoked Bottle
(1) 1.25 mm stainless orifice (pre-installed)
(1) 1.1 mm stainless orifice for lower-flow electric pressure washers
(1) ¼" stainless quick-connect plug with integrated O-ring (no thread tape needed)
(1) Spare EPDM O-ring for main stem
(1) Replacement stainless mesh filter for long-term performance

Limited 1-Year Warranty (US/Canada): If your DRFT Foam Cannon has a defect in materials or workmanship under normal use within one year, we’ll replace it or repair it. Consumables (O-rings, filters, orifices, bottles) and damage from high-pH, solvents, or acids aren’t covered. Claims handled directly by Armour with a receipt from us or an authorized reseller. Full Warranty Disclaimer Listed Below.

Armour DRFT Foam Cannon — Limited One-Year Warranty

Effective Date: August 14, 2025
Product: Armour DRFT Foam Cannon (the “Product”)
Warranty Provider: Armour Detail Supply, LLC (“Armour,” “we,” “us,” or “our”)

1) Coverage & Term

Armour warrants that the Product will be free from defects in materials and workmanship under normal, intended useand when operated per the Product User Guide for one (1) year from the date of original retail purchase by the first end user (the “Warranty Period”).

2) Who & Where This Applies

Original purchaser only; non-transferable.
Territory: United States and Canada only.
Proof required: A dated sales receipt from Armour Detail Supply or an authorized Armour reseller is required. (Marketplace purchases qualify only if the seller is an authorized reseller.)

3) What We Will Do (Exclusive Remedy)

If a covered defect arises during the Warranty Period and you follow the claim process below, Armour will, at its option:

Replace the Product with a new or refurbished unit of equal or better function; or
Repair the Product at no charge using new or refurbished parts.
Refunds are not available under this warranty.
Any repaired or replaced Product is warranted for the remainder of the original Warranty Period or ninety (90) days from the repair/replacement date—whichever is longer.

4) What Is Not Covered (Exclusions)

This warranty does not cover damage, defects, or failures caused by or resulting from:

Misuse or improper use, including operation outside the PSI/GPM ranges or connection types referenced in the Product User Guide;
Normal wear and tear (including cosmetic scuffs, minor bottle discoloration, or abrasions that do not affect function);
Consumables: O-rings, filters, orifices, and bottles (except where failure is due to a manufacturing defect in a non-consumable part);
Chemical damage from high-pH solutions, solvents, or acids, including use of undiluted concentrates contrary to the User Guide;
Mineral/limescale buildup, corrosion, or inadequate flushing/maintenance;
Impact/abuse, including drops, crushing, cross-threading, over-tightening, or tool use on hand-tightened fittings;
Environmental damage, including freezing, excessive heat, or storage contrary to instructions;
Alterations or modifications, including non-Armour replacement parts or nozzles not specified for the Product;
Products without valid proof of purchase, or with removed/defaced labels or batch codes;
Damage during shipping to Armour (ship insured/trackable) or returns sent without an RMA.

Performance note: Foam output depends on pressure-washer specifications, water quality, soap chemistry, and dilution; variations here are not defects in materials or workmanship.

5) Commercial/Professional Use

This warranty applies to consumer and commercial/professional use on the same terms.

6) How To Obtain Warranty Service (Claims Process)

All claims are handled directly by Armour Detail Supply (not through distributors):

Contact Armour Support to request an RMA:
Email: info@armourdetailsupply.com
Web: armourdetailsupply.com/pages/contact
Provide: Proof of purchase, pictures/videos to show product issues, explanation of product issues.
Ship as instructed:
Clearly mark the RMA number on the outside of the package.

Shipping costs:

Inbound shipping to Armour is the customer’s responsibility.
If the claim is approved, Armour covers standard outbound shipping of the repaired/replacement Product to a US or Canadian address.

7) Limits & Disclaimers

No other warranties. To the maximum extent permitted by law, Armour disclaims all implied warranties, including merchantability and fitness for a particular purpose, and limits any implied warranties that cannot be disclaimed to the duration of this Limited Warranty.
No incidental or consequential damages. To the maximum extent permitted by law, Armour is not liable for incidental, special, indirect, or consequential damages, including loss of use or lost profits.
Your rights. Some states/provinces do not allow limitations on implied warranties or the exclusion/limitation of incidental or consequential damages, so the above limitations may not apply to you. This warranty gives you specific legal rights, and you may have other rights that vary by state or province.

8) Safety & Compliance

Use only as directed in the Product User Guide. Always depressurize systems before disassembly, wear appropriate PPE, and follow chemical-manufacturer instructions.

9) Governing Law

This Limited Warranty is governed by the laws of the State of Florida, without regard to conflicts-of-law principles, subject to any non-waivable consumer-protection laws that apply in your state or province.

10) Dispute Resolution — Binding Arbitration & Class-Action Waiver (Opt-Out Available)

US & Canada (consumer and commercial): Except where prohibited by applicable law, any dispute or claim arising out of or relating to the Product or this warranty will be resolved by individual, binding arbitration administered by the American Arbitration Association (AAA) under its Consumer Arbitration Rules (if applicable) or Commercial Arbitration Rules.

Venue & format: Arbitration may proceed by video/teleconference, on written submissions, or in person in Lee or Collier County, Florida, at either party’s reasonable election.
Small-claims carve-out: Either party may bring an individual action in small-claims court with jurisdiction.
Class/jury waiver: You and Armour waive the right to a jury trial and to participate in a class or representative action.
Fees: The AAA rules will govern payment of filing, administration, and arbitrator fees. Armour will pay fees required by the AAA Consumer Rules when applicable.
30-day opt-out: You may opt out of arbitration and the class-action waiver by sending a written notice within 30 days of purchase to info@armourdetailsupply.com or by mail to the address below, stating your name, contact info, product, purchase date, and a clear statement that you opt out.

Canadian consumers: To the extent your provincial consumer-protection laws prohibit mandatory arbitration or class-action waivers, this Section 10 does not apply to you, and your dispute-resolution rights under those laws remain available.

11) Severability

If any provision of this warranty (including the arbitration/class-action waiver) is found unenforceable, the remaining provisions will remain in full force. If the class waiver is limited or voided, the arbitration agreement is void for that dispute.

12) Changes

We may update this Limited Warranty prospectively; changes do not shorten or reduce coverage for Products already purchased within their Warranty Period.

13) Contact

Armour Detail Supply, LLC
28720 S Diesel Drive, Unit 7
Bonita Springs, FL 34135
Email: info@armourdetailsupply.com
Web: armourdetailsupply.com

FAQs

Yes—DRFT uses a standard 1/4" quick-connect fitting, so it mates with most pressure-washer spray guns. For best results, use a pressure washer within the PSI/GPM ranges in the User Guide(higher flow = thicker foam). Most consumer electrics in the ~1.4–2.5 GPM range work well; gas units typically produce even denser foam. If your unit is on the lower-flow side, start with a slightly richer soap mix and warm water, and change the oriface to the 1.1mm provided.

Try this quick checklist:

Soap & mix: Use a high-foaming car shampoo; start around 1–2 oz per 16 oz bottle (adjust to taste). Fill with warm water to help it blend.
Water distribution dial: Close the water mix knob a bit. Turn clockwise for more foam. Generally keep this fully turned clockwise.
Nozzle pattern: Use a wider fan, keep the cannon vertical, and hold the tip 24" from the panel.
Water & hardware: Hard water reduces foam—flush and descale the cannon periodically (white vinegar works). Make sure your pressure washer meets the User Guide specs and that all O-rings/quick-connects seal properly.
Filter maintenance: If output fades, remove the foam filter/mesh, rinse, and soak to clear soap residue or scale; replace with provided extra filter if needed. Always flush clean water through the cannon for 15–30 seconds after use.

After every wash: Run clean water through the cannon for 15–30 seconds, then empty the bottle and let it air-dry. Don’t store with soap inside.
Monthly (or every ~10 uses): Remove the pickup tube and foam filter/mesh, soak parts in warm water or a mild vinegar solution to dissolve soap residue and scale, rinse, and reassemble.
O-rings & seals: Inspect periodically; replace if flattened or cracked. A light silicone grease on O-rings helps sealing and longevity.
Connections: Keep the 1/4" quick-connect clean; make sure fittings seat fully before use.
Storage: Keep upright, out of heat/freezing temps, and depressurized. Hand-tighten the bottle—no tools—to avoid cross-threading.

Customer Reviews

Overall rating: 4.9 / 5 from 63 reviews.

Customer video review of Armour DRFT Foam Cannon

Very nice

Tom X. 5/5 Verified August 25, 2026

Currency