Introducing Panel Prep, a comprehensive and highly effective solution for thorough surface preparation. The unique formulation of isopropyl alcohol, specialized degreasers, and surfactants work together to eliminate any residual compounds and polishing oils that may have been left behind from previous detailing steps, resulting in a completely clean surface that is ready for further treatment. The inclusion of a sophisticated foaming agent not only provides a smooth and effortless application, but also acts as a lubricant to minimize the risk of swirling or any other forms of marring during the preparation process.
As the first and crucial step in any surface protection routine, Panel Prep ensures that the subsequent waxing, sealing, or coating steps will be able to perform at their maximum potential. The ability of Panel Prep to clean and prepare surfaces thoroughly, in combination with its user-friendly formula, makes it an essential tool for both professional detailers and DIY enthusiasts alike.
Whether you are looking for your true finish during polishing or simply ensuring the longevity of your paint's protection, Panel Prep is an indispensable part of your detailing arsenal.
Always test in small area before full application.
Application:
1. For optimal results, spray Panel Prep evenly onto the desired surface and allow it to dwell for 15-30 seconds to effectively dissolve unwanted oils.
2. Wipe the surface with a short nap towel until it is clear, flipping the towel or using a secondary towel for a final wipe.
3. To avoid overspray, be sure to wipe surrounding areas as well.
4. Repeat as necessary until surface oils or protection have been removed.
Surface preparation is crucial to ensure that any previous compounds, oils, or contaminants are removed from the surface, allowing the protection to bond effectively and last longer.
Simply spray Panel Prep onto the surface that you want to clean and prepare, and wipe it down with a clean microfiber towel. Make sure to work in small sections to ensure that the product does not dry on the surface.
Yes, Panel Prep is completely safe for your car's paint. Its unique formulation of isopropyl alcohol, specialized degreasers, and surfactants work together to eliminate any residual compounds and polishing oils without damaging the paint. In fact, Panel Prep is an essential step in ensuring your protection's longevity.
While Panel Prep is not specifically designed to remove water spots, its highly effective cleaning formula can help to remove them if they are not too deeply ingrained. For more stubborn water spots, it is recommended to use a dedicated water spot remover before using Panel Prep for thorough surface preparation.
Customer Reviews
Overall rating: 4.9 / 5 from 27 reviews.
I used Panel Prep as a final wipe down before applying Phobic. It worked great. But what really impressed me was a purpose I didn't expect. Somehow I got a dollop of tree resin on my car. I didn't know what it was until I tried to wipe it off with my fingers and off came a sticky resin substance that wouldn't wash off with soap and water. I thought through my closet of chemical options.. I'll try Panel Prep to clean it. I sprayed it on a microfiber square and pressed it into the sappy resin and it started to come off. A few more applications and no more sticky residue! it was clean!
I don't think Panel Prep is usually the hero of the story but there it is - Panel Prep to the rescue.
Love Panel Prep! It’s super easy to use and makes coating with PRO so much better. It gives you a good bond and allows you to make sure the paint looks its best before coating
Used the panel prep prior to coating this thing in phobic. The panel prep worked so easy and cleaned like a dream. Gets a little grabby as Brandon at ADS had mentioned, shows the panel is clean. I think the result speaks for itself in the video. Yet again ADS hits it out the park
I used CLEAN and DECON to help get the car prepped before I applied PHOBIC.
CLEAN was a great addition, especially wheels , wheel wells, and the grill!!
I have also used CLEAN for cleaning the all-weather floor mats too!!
This is the first full detailing of my 2005 C240 Benz.
I did not know how dirty a vehicle is until I started researching car detailing. I'm so glad I found ADS!!
All products I used were ADS.
I am not a detailer, just an average nobody that actually did detailing at this level for the first time ever. Could the vehicle have been better? Yes. This was my testing vehicle before detailing my Durango GT and Durango Hellcat.
Steps I took:
1. I did not rinse my vehicle to start, I foamed it first with decon soap only. Foamed the entire vehicle, including wheels and tires. I let the foam alone and let it do it's thing.
2. Rinsed off the decon soap -- I did not use 2 bucket wash
3. Applied wheel cleaner, and tire cleaner (one wheel at a time). As mentioned in ADS videos, I let the products for the expected amount of time, then agitated. Rinsed and repat. The wheels were so dirty because as long as I've owned the vehicle, Never had this done.
4. 2 bucket wash to make sure all particles and dirt was removed. Rinsed
5. ADS Iron remover -- one panel at a time. Rinsed
6. Foamed again with decon soap and 2 bucket wash. To make sure Iron remover and any lose particles and dirt were removed.
7. Dried vehicle
8. ADS Panel Prep
9. Applied compound and polish by hand (At this point I was exhausted from steps 1 - 8 lol and Did not feel like pulling out polisher).
10. Panel prep
11. Ceramic spray (I found it easier to spray on to my vehicle and wipe vs spraying microfiber towel then wiping.) Also used it on all of the windows as mentioned in a ADS video.
12. Applied Amplify over the Ceramic Spray
13. Applied Tire+
14. Applied Amplify to the wheels
Thank you ADS!!
Panel Prep worked perfectly in the cleaning process before applying the Armour wheel coating. I used 2 coats to get maximum cleanliness on the weels of all 3 of my vehicles before apply the coating.
I have also used it a a final cleaner before apply sealants to the vehicle needing a refresh.
No need to over use it . It gets the job done with light apllication
Best panel prep I’ve used hands down, no question about it!! Great for prepping windows for a glass coating after a clay of polish. Highly recommend!!!!
From the decon high ph soap, the decon mitt that I searched for for weeks, the tire shine applicator n lotion.. to top it all off the panel prep has a mouthwash minty scent that is so refreshing after smelling dirty vehicles and chemicals everyday. Looking forward to trying more products. Customer service was outstanding also, not sure I can say his Facebook name here but very helpful
Used it on the glass inside and out. Bought a 22 year old Mercedes with almost 22 years of dirt. One application cleaned up the inside and out side. Very impressive cleaner.
The perfect solution for a panel prep.
Other products on the market are either too aggressive (very grabby on the surface) or don't have enough bite to get through polishing residue. ADS Prep covers both of those and as an extra plus, it smells great (like eucalyptus mint). Makes my garage smell great right before doing a coating 😂
This is just what I needed for a panel prep. I have complete faith in these products as so far have not had a single product fail me. I am going to Armour coatings very soon to try them out so wanted the Panel Prep to go with it . This seems to do a great job .
Best smelling panel prep on the market! 😁 I mean what silly goose wouldn't love their whole workspace smelling like they chewed a whole pack of gum? Haha. Not to mention I looove the antistatic properties and after you wipe this off the panel you will feel and be able to tell that it did its job 👍🏼🔥 A++ guys!!
I received this panel prep in my August 23 GloveBox and it works amazing and smells even better. It has become my go to prep wipe and knocked Gyeon Prep down a rung on the ladder. Can't wait to buy more!
