Armour Glass Coating is a premium-grade window coating solution that elevates your driving experience while maintaining the cleanliness of your glass surfaces. This cutting-edge coating features an extremely hydrophobic composition, providing exceptional resistance against water, rain, and other precipitation.
Starting to repel water at speeds of 30 mph, Armour Glass Coating eliminates the need for windshield wipers at highway speeds. The highly durable formula provides up to 2 years of real-world protection on windshield glass and 3+ years of protection on all side and rear glass, it’s built to last, even withstanding up to 80,000 wiper swipes.
Armour Glass Coating is safe to use on all glass surfaces, including tempered glass and laminated glass. This professional-level coating solution is not only highly effective in maintaining a clear view while driving in inclement weather but also helps to extend the life of your windshield wipers. With its durable and long-lasting protection, Armour Glass Coating is a must-have for all drivers looking to enhance their driving experience.
What's Included:
- 30ml Armour Glass Coating w/ Dropper Top
- (1) Mini Microfiber Coating Application Pad
- "How To" Direction Card
We at Armour Detail Supply are committed to developing enjoyable, easy-to-use formulas that provide professional-level results. We live by the notion of providing "Car Care Products That Are NOT Over-Hyped!". Meaning, we are not in the business of overselling our products, providing outlandish claims, or claims only proven in lab environments. Does your vehicle live in a lab? Do you? We didn't think so. So why make claims based on lab results. That’s why we have separated ourselves from industry-specific buzzwords like “ceramic”, “graphene”, “titanium” and “nano”. These coatings primary ingredients are Silica Dioxide(SiO2 or Quartz)/PolySiloxanes/PolySilazanes (as the protection), proprietary resins (as "attachment systems"), and carrier solvents (to provide an easy installation). Hence why we call our "ceramic" coatings, Quartz Coatings. We have done the lab testing of our Coatings, it suggests durability over twice what we are claiming and hardness levels we know are laughable. When entrusting the protection of your vehicle to Armour Quartz Coatings, you are experiencing only real world claims and durability.
Solids Content: N/A
Hardness: Who Cares
Chemical Resistance: Extreme 0-13ph
Durability: 12+ months on windshield glass (highly dependent on wiper usage), 2+ years on side and back glass
Film Thickness: ~2-3 micron
Flash Time: Instant, 15-60 seconds (15-30 seconds on average)
Coverage: 10ml per vehicle
Water Contact Angle: 110°+, Low Sliding Angle
Working Temperatures: 40F to 100F.
Applicable Surfaces: Glass
Shelf Life: 12 months, use within 30 days of opening for best application experience
Precautions:
Shake well.
Avoid applying in direct sunlight.
Wear skin protection.
Wear respiratory protection.
Wear eye protection.
Always test in small area before full application to determine flash time.
Shelf life of 12 months, use within 6 months of opening.
Prep:
The Prep is the most important step of the process, our coating is great but it can not do the prep work for you!
1. Decontaminate the Glass surface using Armour Detail Supply Decon Soap and Iron Remover, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.
2. For best prep practice, polish the glass to promote proper bonding and remove any existing repellent coatings.
3. Use our Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.
You are ready to apply Armour Glass Coating!
Application:
1. After thorough prep prime the applicator with 3 lines to start and each subsequent application will only need a small amount, a little goes a long way.
2. Apply Armour Glass Coating to one section of glass at a time. Apply using a methodical circular motion with medium/heavy pressure. There is no cure time with Armour Glass, it bonds instantly and is ready for removal. Armour Glass can be removed immediately, or left for up to a few hours before removing. Best practice is to apply to all glass surfaces, then proceed with the leveling process.
3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave). Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per glass section.
We highly recommend applying 2 layers on the windshield. If you wish to apply multiple layers, there is NO cure time between layers; you can apply them instantly or wait - it's your choice.
After Care:
Armour Glass requires NO cure time. The vehicle can be driven and get wet immediately.
October 2024 Revision - Ground Up Reformulation. Switch from Quartz to Silane Base. Increased Surface Slickness, Increased Abrasion and Detergent Resistance, Increased Water Contact Angle, Increased Sliding Angle, Stronger Bonding to Glass Surface, Removed Cure Time, Increased Ease of Application, Increased Coating Shelf Life
Repellent
Enhanced Visibility
This cutting-edge coating features an extremely hydrophobic composition, providing exceptional resistance against water, rain, and other precipitation
FAQs
Two to three cars
Yes! If you wish to apply multiple layers, wait 30-60 minutes between layers.
Allow product to sit 12 hours at minimum for initial cure. After 12 hours the vehicle can be driven and get wet. Do not wash or induce to chemicals for 7 days.