Armour PRO Quartz Coating
Armour PRO Quartz Coating
Armour PRO Quartz Coating
Armour PRO Quartz Coating
Armour PRO Quartz Coating

Armour PRO Quartz Coating

Highly Resistant 87% Solids 99.9% Purity Quartz Coating
Login to view price
Shipping calculated at checkout.

Armour PRO Quartz Coating is available to consumers, however, we are providing a top tier professional coating on the consumer level. To gain access to Armour PRO each applicant will go through a quick "vetting" process to determine their readiness for this level of coating. Please apply here to gain an approved account!

Armour PRO Quartz Coating is the epitome of high-performance protective coatings, delivering unparalleled protection in a single layer application. With a solids content of 87% (SiO2) at a purity of 99.9%, the coating provides the highest level of protection available to consumers.

The advanced formula of Armour PRO Quartz Coating creates an extremely hard and resistant layer that protects your surfaces from stains, bugs, sap, etching, and scratches. The exceptional slickness of the surface helps repel dirt, making maintenance of your vehicle effortless and safe. The coating can be applied as a single layer, or as a base layer for the standard Armour Coating for added benefits such as increased slickness, gloss, self-cleaning, and extreme hydrophobic properties.

With real-world protection of 5+ years in a single layer, Armour PRO Quartz Coating offers an unparalleled solution for enhancing the appearance and protection of your vehicle. Whether you are a seasoned professional or a DIY enthusiast, the coating's top-of-the-line formula and user-friendly application process make it the ideal choice for anyone looking to take their vehicle protection to the next level.

What's Included:

  • 30ml Armour PRO Quartz Coating Dropper Top
  • (1) Microfiber Coating Application Pad (We recommend purchasing extras)
  • "How To" Direction Card

We at Armour Detail Supply are committed to developing enjoyable, easy-to-use formulas that provide professional-level results. We live by the notion of providing "Car Care Products That Are NOT Over-Hyped!". Meaning, we are not in the business of overselling our products, providing outlandish claims, or claims only proven in lab environments. Does your vehicle live in a lab? Do you? We didn't think so. So why make claims based on lab results. That’s why we have separated ourselves from industry-specific buzzwords like “ceramic”, “graphene”, “titanium” and “nano”. These coatings primary ingredients are Silica Dioxide(SiO2 or Quartz)/PolySiloxanes/PolySilazanes (as the protection), proprietary resins (as "attachment systems"), and carrier solvents (to provide an easy installation). Hence why we call our "ceramic" coatings, Quartz Coatings. We have done the lab testing of our Coatings, it suggests durability over twice what we are claiming and hardness levels we know are laughable. When entrusting the protection of your vehicle to Armour Quartz Coatings, you are experiencing only real world claims and durability.

Solids Content: 87% (SiO2) at 99.9% Purity

Hardness: >9H (Who Cares)

Chemical Resistance: Extreme, -0-13ph

Durability: 5+ Years real world tested (lab tested for over double, our competitors would claim this)

Film Thickness: ~3-4 micron

Flash Time: 1-3 minutes (1-2 minutes on average)

Coverage: 15ml per small car, 30ml per truck

Water Contact Angle: 108-110°

Working Temperatures: 40F to 100F.

Applicable Surfaces: Paint, Chrome, Plastic, Wheels

Shelf Life: 12 months, use within 7 days of opening for best application experience


Shake well.

Avoid applying in direct sunlight.

Wear skin protection.

Wear respiratory protection.

Wear eye protection.

Always test in small area before full application to determine flash time.

Applying in colder conditions will lengthen time frame before wipe-off (closer to 3-5 minutes). Applying in hotter conditions will give you a shorter time frame before you wipe-off (closer to 1 minute).

Shelf life of 12 months, use within 7 days of opening.


The Prep is the most important step of the process, our coating is great but it can not do the prep work for you!

1. Decontaminate the paint surface using Armour Detail Supply Decon Soap and Iron Remover, followed by removing further embedded contamination with a clay bar or synthetic clay mitt.

2. If swirl marks, or scratches are present, polish the paint to reduce any surface defects and create maximum gloss.

3. Use our Armour Detail Supply Panel Prep to remove any oils/residue left from your polishing step. If you did not polish the surface, repeat this step twice to ensure a clean surface.

You are ready to apply Armour PRO Quartz Coating!


1. After thorough prep prime the applicator with 3 lines start and each subsequent application will only need a small amount, a little goes a long way. 

2. Apply Armour PRO Coating 1 panel at a time. Initially create an "X" pattern on the panel, then box in all edges to allow for even distribution of the coating. Follow through the panel with small overlapping circles (like a wax) making sure to have even, level coverage. Allow the product to “set up” for 1-5 minutes depending on temperature/humidity (generally 2-3 minutes). Look for light hazing to appear before removing.

3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per panel.

4. While using Armour PRO, you will need to switch to a fresh side on your applicator every 3-4 panels, as the coating is so concentrated, it starts to cure hard in the applicator.

5. Use a fresh side of your removal towels every other panel. You may need 2 (1st wipe) towels when using Armour PRO.

Allow 1-2 hours if you choose to layer Armour Quartz Coating on top of the Armour PRO Coating.

After Care:

Allow product to sit 12 hours at minimum for initial cure. After 4 hours you can apply our Armour Detail Supply AMPLIFY or Ceramic Spray Sealant to protect the coating during its initial cure. After 12 hours the vehicle can be driven and get wet. Do not wash or induce to chemicals for 7 days.


Two small cars. One Midsize Car/SV with product left over. One Large Truck/SUV.

Yes, however, all Armour Coatings were made to be single layer only! If you wish to apply a second layer, wait 1-2 hours between layers.

Yes! Both Armour and Armour PRO coating can be used on plastic trim. They will provide a sleek darkening effect to the plastic, and provide significant UV protection and hydrophobic properties to the plastic surface.

Allow product to sit 12 hours at minimum for initial cure. After 4 hours you can apply our Armour Detail Supply AMPLIFY to protect the coating during its intial cure. After 12 hours the vehicle can be driven and get wet. Do not wash or induce to chemicals for 7 days.

Recently viewed